AUDIO input connector
—
•
DSC 3G-HD A
— Connect audio from the source to this 5-pole captive screw
connector. Analog audio input can be embedded on the HDMI output. AES
audio that is embedded on the SDI input can be identified and one to four pairs
(8 channels) of the available 16 channels can be embedded on the HDMI output:
•
If eight-channel digital is selected, four of the eight available channel pairs are
used.
•
If two-channel digital is selected, one of the eight pairs can be selected.
•
DSC HD-3G A
— If desired, connect analog audio input from the source to this
5-pole captive screw connector. HDMI or analog audio can be passed through to
the SDI outputs as AES pairs.
Unbalanced Stereo Input
Balanced Stereo Input
Tip
Ring
Tip
Ring
Sleeves
Do not tin the wires!
Tip
Sleeve
Sleeve
Tip
LR
LR
inch (5 mm) MAX.
Figure 5.
Wiring the Audio Input Connector
ATTENTION:
•
The length of the exposed wires in the stripping process is critical. The
ideal length is 3/16 inch (5 mm). If the exposed portion is longer, the wires
may touch, causing a short circuit between them. If the exposed wires are
shorter, they can be easily pulled out, even if tightly fastened by the captive
screws.
•
La longueur des câbles exposés est primordiale lorsque l’on entreprend de
les dénuder. La longueur idéale est de 5 mm (3/16 inches). S’ils sont un peu
plus longs, les câbles exposés pourraient se toucher et provoquer un court
circuit. S’ils sont un peu plus courts, ils pourraient sortir, même s’ils sont
attachés par les vis captives.
•
Do not tin the wires. Tinned wires are not as secure in the captive screw
terminals and could pull out.
•
Ne pas étamer les câbles. Les câbles étamés ne sont pas aussi bien fixés
dans les terminaisons des à vis captives et pourraient sortir.
•
For unbalanced audio, connect the sleeves to the ground contact.
Do not
connect them to negative (–) contacts.
•
Pour l’audio asymétrique, connectez les manchons au contact au sol. Ne
PAS connecter les manchons aux contacts négatifs (–).
Output connectors
—
•
DSC 3G-HD A
HDMI output
— Connect an HDMI display device to this HDMI
connector, and secure it using the LockIt bracket (see
Connector using the LockIt Bracket
on the next page).
•
DSC HD-3G A 3G/HD/SD-SDI outputs
— Connect one or two SDI output
devices to one or both of these BNC connectors. These output ports transmit
signals that follow SMPTE standards 259M, 292M, and 424M.
REMOTE RS-232 port
— For serial RS-232 control, connect a host computer or
control system to the 3-pole captive screw connector (see
on the next page).
DSC 3G-HD A and DSC HD-3G A • Installation
7
Содержание DSC 3G-HD A
Страница 1: ...User Guide DSC 3G HD A and DSC HD 3G A Scalers Video Scalers 68 2261 01 Rev F 11 21...
Страница 6: ......
Страница 8: ...DSC 3G HD A and DSC HD 3G A Contents viii...