Extron electronics Annotator Скачать руководство пользователя страница 40

Страница: 40 / 107

On Screen Annotation, cont’d

Annotator • On Screen Annotation

4-4

Annotation Overview

The Annotator's output has the capability to include a graphical tool bar which

is used for annotation. The tool bar can be enabled or disabled as desired. When

enabled, the tool bar is visible down the right side of the display and allows

selection of the following:

Inputs selection, Pointer, Auto Image, Freehand, Line, Arrow, Rectangle, Ellipse,

Text, Highlighter, Size select, Eraser, Color, Fill, Undo, Redo, Clear, Tools - Capture,

Freeze, Mute, Whiteboard, Spotlight, Zoom, and Pan.

Figure 4-4 — Annotation menu examples

When clicking on the tool bar arrow

, the tool bar slides in from the right

side, and can be accessed through a touch screen, or by using a standard mouse

and/or keyboard attached to the rear PS/2 ports.
The tool bar disappears (hides) after a user-specified time-out.

If the time-out is set to zero, the tool bar remains on-screen indefinitely.

Default annotation buttons

Input selection

—

Selecting this button opens a pop-up

palette displaying the Annotator's six inputs. Selecting

any input button switches the display to that input.

A seventh input button (shown at right) is also displayed if an

optional HD-SDI input board is installed.

Pointer

—

Selecting this button changes the cursor to an

extra-large arrow of the currently selected color.

Auto-Image

™

—

On selection of this button, the unit performs an

auto image on the currently selected input. A secondary button appears

to the left of the Auto Image button to confirm the action is desired.

Содержание Annotator












































































































Результаты поиска

Содержание Annotator

Отзывы:

Бренды по названию

Популярные бренды

Extron electronics Annotator, Руководство пользователя

Результаты поиска

Содержание Annotator

Отзывы:

Бренды по названию

Популярные бренды