Extron electronics 60-1017-0200, Руководство пользователя

Страница: 28 / 60

TLP 350CV • Initial Configuration
3-2
Initial Configuration
Configuring the TLP 350CV (Initial Setup)
Prior to using the TLP 350CV, it is essential to configure it using the internal
on-screen menus. The TLP 350CV contains a set of on-screen menus used to
configure the touch panel. The menus are pre-loaded and cannot be altered by the
user.
a
c
b
d
g
f
h
e
Figure 3-1 — Menu (
e
), Reset (
f
), and reset LED (
g
)
Internal On-screen Menus
There are five screens (Main, Volume (Vol), Time, IP, and Video (Vid)) selected by
pressing the appropriate button at the screen perimeter. There is also an Exit button
at the bottom right corner of the screen for leaving the menus.
To enter the Main Menu, press the recessed front panel Menu button (
e
) once.
Main Menu
Allows adjustment of the Sleep Timer, Panel Brightness (Backlight), Auto backlight
operation and the LED Backlight.
Main
Vol
Time
IP Exit
Down Up
Down
On On
Up
Sleep timer: 50000 Sec
Backlight: 073%
Auto
Backlight
Vid
LED
Backlight
Figure 3-2 — Main menu
Sleep Timer
Sleep mode is activated when there has been a period (0 to 50000 seconds) of
inactivity. The backlight is switched off and the touch screen goes dark. Adjust the
sleep timer from 0 to 50000 seconds by pressing the
Down
or
Up
buttons.
Sleep mode is overridden by user interaction with the touch screen or side buttons.
When the sleep mode is overridden, the backlight is switched on and the screen
displays the graphics and text that were shown as the sleep timer activated.
N When the sleep mode is overridden by a press on the touch screen, the first press
is ignored to avoid inadvertent button operation. Subsequent presses on buttons
will engage button functions.