Extron electronics 60-1017-0200, Руководство пользователя

Страница: 26 / 60

Installation and Operation, cont’d
TLP 350CV • Installation and Operation
2-16
Front Panel Controls and Indicators
The front panel provides control and operation via the touch screen, the side buttons,
and speaker.
a
c
b
d
g
f
h
e
Figure 2-16 — TLP 350CV front panel
a
Light Sensor — Provides auto-dimming of the display to maximize viewability in
differing lighting conditions.
b
LCD screen — The backlit LCD screen has a resolution of 320 x 240, with
18 bits/pixel (6 bits/color) plus an 8 bit alpha channel providing 26-bit color
depth. The touch overlay is broken into a grid with each square corresponding to
64 (8x8) pixels on the LCD screen.
c
Speaker — Provides audio feedback of button or panel presses.
d
Configurable Side buttons — 10 dedicated, customizable function buttons
provide quick access to key functions.
A set of 6 buttons with alternative labels is included with the TLP 350CV. There
are also additional titles available.
See Appendix B, "Reset Modes and Button Replacement" , for available labels,
ordering instructions, and a procedure for changing the buttons.
e
Menu Button (under faceplate) — A menu button is used to configure system
and display preferences.
N
The menu and reset buttons are accessible through small holes in the faceplate. A
paperclip may be used to press the buttons.
f
Reset Button (under faceplate) — A reset button is used to activate any of the
predefined factory reset modes, including returning the panel to factory defaults
( See Appendix B ).
g
Reset LED Indicator (under faceplate) — Green LED that flashes to indicate the
various reset modes (See Appendix B .)
h
Illumination LEDs — A small block of LEDs illuminate the Cable Cubby inner
AAP plates.