manualshive.com logo in svg

ExtremeSwitching 200 Series, Руководство администратора

Поделиться
Скачать
ExtremeSwitching 200 Series Скачать руководство пользователя страница 211

Multicast Router VLAN Status

Use the Multicast Router VLAN Status page to enable or disable specific VLANs as static multicast
router interfaces for a physical port or 

LAG

 and to view the multicast router VLAN status for each

interface. A multicast router interface faces a multicast router or MLD querier and receives multicast
traffic. If a multicast router is attached to the switch, its existence can be learned dynamically. You can
also statically configure one or more VLANs on each interface to act as multicast router interfaces.

To access this page, click 

Switching

 > 

MLD Snooping 

 > 

Multicast Router VLAN Status 

in the

navigation menu.

Use the buttons to perform the following tasks:

•

To enable one or more VLANs as multicast router interfaces on a port or LAG, click 

Add

 and

configure the settings in the available fields.

•

To change the VLANs that are enabled as multicast router interfaces for a port or LAG, select the
entry with the settings to change and click 

Edit

.

•

To disable all VLAN multicast routing interfaces for a port or LAG, select each entry to modify and
click 

Remove

. You must confirm the action.

Table 213: MLD Snooping Multicast Router VLAN Status Fields

Field

Description

Interface

The interface associated with the rest of the data in the row. Only interfaces that
are configured with multicast router VLANs appear in the table. When adding
multicast router VLAN information for an interface, use the Interface menu to
select the interface on which to enable one or more multicast router VLAN
interfaces. When editing multicast router VLAN information, this field shows the
interface that is being configured.

VLAN IDs

The ID of each VLAN configured as enabled as a multicast router interface on the
associated interface. When changing the multicast routing VLAN interfaces that
are associated with an interface, click the VLAN ID to select it (or 

[Ctrl]

 + click to

select multiple VLAN IDs).

Click 

Refresh

 to refresh the page with the most current data from the switch.

Configuring MLD Snooping Querier

Use this page to configure the global MLD snooping querier settings on the device. MLD snooping
requires that one central switch or router periodically query all end-devices on the network to announce
their multicast memberships. This central device is the MLD querier. When Layer 3 IP multicast routing
protocols are enabled in a network with IP multicast routing, the IP multicast router acts as the MLD
querier. However, if the IP-multicast traffic in a VLAN needs to be Layer 2 switched only, an IP-multicast
router is not required. The MLD snooping querier can perform the MLD snooping functions on the
VLAN.

Note
This feature is available for 220 switches only.

Configuring Switching Information

ExtremeSwitching 200 Series: Administration Guide

211

Содержание 200 Series


















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды