Instructions for Safe Operation
After washing hands, place hands approximately 4 to 6 inches (100 to 150 mm) under hand dryer nozzle until dry.
The dryer is activated by an infrared sensor. The dryer operates as long as hands are below the nozzle. There is a
maximum 35 second running time with a safety override feature if hands are not removed.
The dryer incorporates a non‑self‑resetting thermal cut‑out that is reset by disconnection of the supply mains.
CPC models are equipped with Cold Plasma Clean
®
technology.
e
X
treme
A
ir
High Speed Hand Dryer
Owner’s Manual
Instructions apply to the following models:
CPC9
GXT9
EXT7
CPC9‑M GXT9‑M EXT7‑M
CPC9‑BG GXT9‑BG EXT7‑BG
CPC9‑C GXT9‑C EXT7‑C
CPC9‑SS GXT9‑SS EXT7‑SS
User Maintenance Instructions
DO NOT spray water or cleaning solvents through dryer vents. DO NOT use abrasive, chlorinated, or highly
alkaline cleaners. DO NOT use oil based cleaners.
Cleaning should be preformed on a regular basis at least twice per year.
Clean cover with a mild soap or detergent and warm water, using a soft cloth or sponge.
It is not necessary to disconnect power for cleaning.
e
X
treme
A
ir
®
MFD by AMERICAN DRYER, INC.
33067 INDUSTRIAL ROAD, LIVONIA, MI 48150, U.S.A.
Telephone (734) 421‑2400 • Fax (734) 421‑5580
americandryer.com • Email: [email protected]
Revised October 2014