manualshive.com logo in svg

EXTREME SWITCHING 4850GTS, Инструкция по установке

EXTREME SWITCHING 4850GTS - уменьшает сложность установки с помощью Installation Job Aid. Получите бесплатный мануал для вашего устройства и с легкостью установите его, скачав его с manualshive.com. Максимальный комфорт и профессиональное качество!

Поделиться
Скачать
background image

Installation Job Aid for VSP 4850GTS

Release 6.1.0.0

NN46251-308

Issue 02.01

November 2017

Notices

Notice paragraphs alert you about issues that require your attention. The following paragraphs
describe the types of notices used in this guide.

Note:

Notes provide tips and useful information regarding the installation and operation of products.

Electrostatic alert:

ESD

ESD notices provide information about how to avoid discharge of static electricity and
subsequent damage to products.

Caution:

Caution notices provide information about how to avoid possible service disruption or damage to
products.

Warning:

Warning notices provide information about how to avoid personal injury when working with
products.

Voltage:

Danger — High Voltage notices provide information about how to avoid a situation or condition
that can cause serious personal injury or death from high voltage or electric shock.

Danger:

Danger notices provide information about how to avoid a situation or condition that can cause
serious personal injury or death.

©

 2017, Extreme Networks, Inc.

All Rights Reserved.

1

Содержание 4850GTS












Отзывы:

Нет отзывов

Похожие инструкции для 4850GTS

Бренды по названию

Популярные бренды

Загрузить еще бренды