3. Slide the transceiver from the module slot.
4. If the transceiver does not slide easily from the module slot, use a gentle side-to-side rocking
motion while firmly pulling the transceiver from the slot.
5. Attach a dust cover over the fiber-optic bores and store the transceiver in a safe place until
you need it.
Important:
Discard transceivers in accordance with the proper laws and regulations.
Power specifications for VSP 4450GTX-HT-
PWR+
The following table describes the regulatory AC power specifications for the VSP 4450GTX-HT-
PWR+ switch. The regulatory power specifications are based on the maximum rated capacity of the
power supplies and are not based on typical power consumption which is lower.
Table 1: AC power specifications
4450GTX-HT-PWR+
Input Current:
16.66A/8.33A
Input Voltage (rms):
100 to 240VAC at 50 to 60 Hz
Power Consumption:
• Without PoE+
- Typical: 100W
- Maximum: 145W
• With PoE+
- Typical power utilization depends on the number
of ports using PoE+.
- Maximum power utilization depends on the
number of PSUs deployed and the temperature
range in which the switch operates.
• With one operating PSU, the maximum power
consumption is:
Table continues…
November 2017
Installation Job Aid for VSP 4450GTX-HT-PWR+
7
