Maintenance Safety
Summit X460-G2 Series Switches Installation Note
4
permanently attached to the equipment rack so that it is always available when you need to handle
ESD-sensitive components.
●
Install all cables in a manner that avoids strain. Use tie wraps or other strain relief devices.
General Safety Precautions
●
Do not try to lift objects that you think are too heavy for you.
●
When you install equipment in a rack, load heavier devices in the lower half of the rack first to
avoid making the rack top-heavy.
●
For Summit desktop equipment installations, do not place a monitor or other heavy objects on top of
the equipment. The chassis cover is not designed to support weight.
●
Use only tools and equipment that are in perfect condition. Do not use equipment with
visible damage.
●
Route cables in a manner that prevents possible damage to the cables and avoids causing accidents,
such as tripping.
Selecting AC Power Supply Cords
Extreme Networks does not include AC power input cords in the product box. To purchase a power
cord for your product and for your specific country, contact your local Extreme Networks Channel
Account Manager or Sales Manager, or purchase a cord from your local supplier.
To locate a Sales Manager or Partner in your region visit:
http://www.extremenetworks.com/how-to-buy/how-to-buy.aspx
Power cords that are used with AC-powered Summit X460-G2 series switches must meet the
following requirements:
●
The power cord must be agency-certified for the country of use.
●
The power cord must have an IEC320-C13 connector for connection to the switch or external power
supply.
●
The power cord must have an appropriately rated and approved wall plug applicable to the country
of installation.
●
For cords up to 6 feet (2 m) long, the wire size must be 18 AWG (.75 mm
2
) minimum; over 6 feet, the
minimum wire size is 16 AWG (1.0 mm
2
).
Connecting Power
For the specific ratings and input power requirements of each switch model, see the data sheet for the
Summit X460-G2 series switches at http://www.extremenetworks.com.
WARNING!
Be sure to satisfy the requirements listed in this section when you connect all Extreme Networks
equipment to power.
