Extreme Networks Summit WMScanner, Руководство пользователя, Страница: 184 / 217

Model Building
Summit WMScanner Users Guide
182
Rescale Floor
The Rescale Floor button allows you to set the scale for the floor you have chosen to edit from the
Building Floor Manager’s main dialog. The scaling command will resize all entities within the floor.
You will be prompted to select two points in the drawing (by clicking with the mouse) and then you
will be prompted to enter the actual physical real world distance between the two locations. The
appropriate scaling will be applied so that the distance between the points within the drawing matches
the value you enter.
See “Snap to Endpoint” on page 183 for information on how to select your scaling points more
accurately.
Reset Floor Alignment Point
The Reset Floor Alignment Point button allows you to choose the location that you wish to be the origin
of the x-y plane of the top down perspective of the floor. The point you choose to be the origin is also
the point within the drawing that will be used to align this floor with floors above and below it.
See “Snap to Endpoint” on page 183 for information on making your origin point selection more
accurately.
Draw New Partitions
The Draw New Partitions button allows you to draw new walls to the floor you have chosen to edit.
Press the Draw New Partitions button to be taken to the Draw Partition dialog box detailed in section
“Drawing Partitions” on page 196 . With the Draw Partition dialog box, you draw individual partitions, a
square room, and delete partitions.