Extreme Networks ExtremeWireless AP4000 Скачать руководство пользователя страница 4

Preface

Read the following topics to learn about:

The meanings of text formats used in this document.

Where you can find additional information and help.

How to reach us with questions and comments.

Text Conventions

Unless otherwise noted, information in this document applies to all supported environments for the
products in question. Exceptions, like command keywords associated with a specific software version,
are identified in the text.

When a feature, function, or operation pertains to a specific hardware product, the product name is
used. When features, functions, and operations are the same across an entire product family, such as
ExtremeSwitching switches or SLX routers, the product is referred to as 

the switch

 or 

the router

.

Table 1: Notes and warnings

Icon

Notice type

Alerts you to...

Tip

Helpful tips and notices for using the product

Note

Useful information or instructions

Important

Important features or instructions

Caution

Risk of personal injury, system damage, or loss of data

Warning

Risk of severe personal injury

4

ExtremeWireless™ Indoor Access Point AP4000

Содержание ExtremeWireless AP4000


































Отзывы: