
4 From the
Request a New Channel
drop-down menu, select a channel according to the site channel
plan, or request the AP to auto select the channel from the channel list set in the Channel Plan
setting.
Figure 14: AP3935e Radio 1 Properties — Channel Plan setting
5 Repeat the process for Radio 2.
Configuring Radio Transmit (Tx) Power
Based on the configured mode, channel, channel plan, and channel width for the specific antenna, the
professional installer must enter the corresponding Transmit Power (Tx Power) for the desired Radio
using the Extreme Networks Wireless Assistant.
1 Log into the Wireless Assistant.
2 From the top menu, click
AP
.
The Wireless AP screen is displayed.
Installation
ExtremeWireless™ AP3935i & AP3935e Installation Guide
24