Extreme Networks ExtremeWireless AP302W Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 48

Extreme Networks ExtremeWireless AP302W Скачать руководство пользователя страница 19

Install the Access Point on a Wall

Learn how to install the access point to a solid flat surface such as a wall using the in-box wall plate
stainless-steel bracket or the -EXT accessory.

Before You Begin

•

The mounting surface must be able to support the access point in all environmental conditions.

•

The mounting surface must be flat.

Hardware required for wall installation:

•

One AP302W access point

•

One in-box wall plate stainless-steel bracket

•

Two pan head M3.5×16 mm long screws for solid wall or anchor attachment

•

Two 25 mm long white plastic screw-in anchors

Note
Provide your own Phillips screwdriver, a torx screwdriver, and a pencil.

About This Task

Install the access point on a flat surface such as a wall or a solid flat ceiling using the in-box wall plate
stainless-steel bracket.

Install the Access Point

Install the Access Point on a Wall

ExtremeWireless™ Access Point AP302W

19

«
...
17
18
19
20
21
...
»

Содержание ExtremeWireless AP302W

















































Отзывы:

Нет отзывов