Extreme Networks ExtremeSwitching SLX 9250, Руководство по установке оборудования

Страница: 22 / 97

Table 12: Authorities on Electrical Codes (continued)
Organization Address Web Site URL
National Electrical Manufacturing Association (NEMA)
(USA only)
Organization of electrical product manufacturers.
Members develop consensus standards for cables,
wiring, and electrical components.
NEMA
1300 N. 17th Street
Rosslyn, VA 22209
USA
www.nema.org
Electronic Components Industry Association (ECIA)
Trade association that develops technical standards,
disseminates marketing data, and maintains contact
with government agencies in matters relating to the
electronics industry.
ECIA
111 Alderman Drive
Suite 400
Alpharetta, GA 30005
USA
www.ecianow.org
Federal Communications Commission (FCC) (USA only)
Commission that regulates all interstate and foreign
electrical communication systems that originate in the
United States according to the Communications Act
of1934. The FCC regulates all U.S. telephone and cable
systems.
FCC
445 12th Street S.W.
Washington, DC 20554
USA
www.fcc.gov
Setting up the Wiring Closet
Be aware of the following recommendations for your wiring closet:
•
Make sure that your system is easily accessible for installation and service. See Rack Specifications
and Recommendations on page 24 for more information.
•
Use appropriate AC or DC power, power distribution, and grounding for your specific installation.
•
Use a vinyl floor covering in your wiring closet. (Concrete floors accumulate dust, and carpets can
cause static electricity.)
•
Prevent unauthorized access to wiring closets by providing door locks. Install the equipment in a
secured, enclosed, and restricted access location, ensuring that only qualified service personnel have
access to the equipment.
•
Provide adequate overhead lighting for easy maintenance.
•
Be sure that each wiring closet has a suitable ground. All equipment racks and equipment installed
in the closet should be grounded.
•
Be sure that all system environmental requirements are met, such as ambient temperature and
humidity.
Note
We recommend that you consult an electrical contractor for commercial building and wiring
specifications.
Controlling the Temperature
Extreme Networks equipment generates a significant amount of heat. It is essential that you provide a
temperature-controlled environment for both performance and safety.
Setting up the Wiring Closet Preparing for the Installation
22 ExtremeSwitching SLX 9250 Hardware Installation Guide