Extreme Networks BlackDiamond 6800 страница 39 Скачать руководство пользователя | Manualshive

Страница: 39 / 110

background image

Asynchronous Transfer Mode (ATM) Module Installation and User Guide

2-15

Troubleshooting

Upgrading the ATM Module BootROM

Like the MSM module, the ATM module has its own BootROM image.

To view the ATM module BootROM version, use the following command:

show slot {<slot>}

This command is the same command used to display slot information for other I/O and
MSM modules, but the command is augmented to display data about the software
images loaded on the ATM module.

To upgrade the ATM module BootROM image, use the following command:

download bootrom [<ipaddress> | <hostname>] <filename> {slot <slot>}

This command is the same command used to download BootROM images to MSM
modules, but you use the

slot <slot>

option to download the specified image file to

the ATM module in the specified slot rather than to one of the switch’s MSM modules.

Note: Do not power off the switch while the BootROM is being upgraded. If the
BootROM upgrade is interrupted, the module will be unable to boot up until the
BootROM upgrade is completed. If you experience a problem with the BootROM
upgrade, contact Extreme Networks Technical Support.

See Chapter 3 for more information about changing images and configuration attributes.

Fixing Power-Related Problems

If the LEDs on all other modules are off, verify that the BlackDiamond 6800 series
switch is connected to an appropriate power source and is turned on.

If the LEDs on the new module are off, but the LEDs on other modules are on, try
ejecting and reseating the unpowered module. If the module still does not power up, it
is possible that the available system power is not sufficient to handle the power
requirements of the added module. To test this condition, temporarily eject another I/O
module to see whether that frees enough power to power up the new card. If it does,
you may need to upgrade the power supply configuration in this BlackDiamond 6800
series switch. For more information on system power configuration, see the
BlackDiamond 6800 Series Switch Hardware Installation Guide.

«
...
37
38
39
40
41
...
»

Содержание BlackDiamond 6800















































































































Отзывы:

Нет отзывов

Похожие инструкции для BlackDiamond 6800

MES ACURAS HEAD

Бренд: Barco Страницы: 131

Бренд: e-motion Страницы: 2

Бренд: Obelink Страницы: 2

Бренд: Garmin Страницы: 22

Бренд: ICON ProAudio Страницы: 29

Бренд: Honda Страницы: 73

Бренд: Wagan Страницы: 8

Бренд: ADIC Страницы: 6

Бренд: Thermo King Страницы: 2

MEDIA WIRELESS DESKTOP 800 -

Бренд: LABTEC Страницы: 12

Бренд: handi quilter Страницы: 2

Single Sensor Set

Бренд: Revbox Страницы: 10

Бренд: Viking Страницы: 10

Бренд: Kodak Страницы: 2

Бренд: Godox Страницы: 31

Бренд: Swisher Страницы: 1

Бренд: Anslut Страницы: 6

Бренд: Zamel Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды