Extreme Networks 31015/WS-AP3935e-ROW, Руководство по установке

Страница: 13 / 46

ExtremeWireless™ AP3935 Installation Guide 5
Architectural Features
Console Port
The AP3935 i and e models both include a single RJ45 console port (shown in Figure 1 ‐ 3 on page 3)
for debug purposes. This port enables connection of a console device to the AP through a serial
cable. The console device can be a PC or workstation running a VT ‐ 100 terminal adapter emulator,
or a VT ‐ 100 terminal.
LAN Port
The AP3935 has two 10/100/1000BaseT RJ45 LAN ports (see Figure 1 ‐ 3 on page 3) that can be
attached directly to a 10/100/1000BaseT LAN segment. This segment must conform to the IEEE
802.3 or 802.3u specifications.
The APs appear as Ethernet nodes and perform a bridging function by moving packets from the
wired LAN to remote workstations on the wireless infrastructure.
The LAN ports also support power over Ethernet PoE 802.3at for full performance; (802.3af for
low performance mode). Refer to “ Installation ” on page 7, for information on supplying power to
the AP network port from a network device, such as a switch, that provides Power over Ethernet
(PoE).
Reset Switch
The AP3935 provides a Reset Switch to reset or restore factory default configurations. Use a
pointed object to press the switch button through the hole.(See Figure 1 ‐ 3 on page 3). If you hold
down the button for less than 5 seconds, the AP performs a software interrupt, causing it to drop
all connections and reset. If you hold the button down for 5 seconds or more, any configuration
changes are removed, and the factory default configuration restores to the AP.
2 (Ethernet link state) LAN 1 On Green Indicates a valid 10Mbps or 100Mbps
Ethernet link.
On Amber Indicates a valid 1Gbps Ethernet link.
Off Indicates the link is down.
3 (Ethernet link state) LAN 2 On Green Indicates a valid 10Mbps or 100Mbps
Ethernet link.
On Amber Indicates a valid 1Gbps Ethernet link.
Off Indicates the link is down.
4 (Radio 2 status) On Green Indicates Radio 2 is enabled.
Off Indicates Radio 2 is not on.
5 (Radio 1 status) On Green Indicates Radio 1 is enabled.
Off Indicates Radio 1 is not on.
Table 1-1 AP3935 LED Indications
LED Status Description