Part Number: 120855-00 Rev. 01
1
Summit X440 Series Switches
Installation Note
16519 & 16519T, 16520 & 16520T
Pre-installation Requirements
Before you install the Summit X440 series switch, read the information in
“Safety Information” on
page 2
.
The following items are provide with the Summit X440 series switch:
●
Mounting brackets
●
Eight M3 screws to secure the mounting brackets to the switch
To install the switch in a rack, you need the following additional tools and equipment:
●
Four rack mounting screws to match your equipment rack
Screwdriver to fit the rack mounting screws
●
AC power cord that is suitable for the current rating of this product (See
“Selecting AC Power
Supply Cords” on page 5
.)X440
Required Tools
The following items are provided with the Summit X440 series switch:
●
Two rack mounting brackets adaptable for either a front-mount or mid-mount installation
●
Twelve screws for attaching the brackets to the switch enclosure
●
For DC models, spade terminal and M4 screw with captive washer for grounding the switch
You need the following additional tools and materials to install the switch in a rack:
●
#1 Phillips screwdriver
●
Four rack mounting screws to match your equipment rack
●
Screwdriver to fit the rack mounting screws
●
#14 AWG stranded copper cable for grounding the switch (DC powered models)
●
ESD-preventive wrist strap for installing optional ports at the back of the switch
