EXTREME FIRE
STEEL FIRE RING
Installation and Operating Instructions
MODEL NO. #50003, #50004, #50005, #50006, #50007, #50007, #50008, #50009
STEEL FIRE RING
WARNING: If the information in these instructions is not followed exactly, a fire or explosion may result causing
property damage, personal injury, or loss of life.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this fire ring when in use.
This appliance is designed only for burning wood, charcoal, and similar low-density materials. This appliance is not
intended for use with coal or any high-density combustible materials.
This fire ring can only be used on top of concrete pads, bare dirt areas, and gravel covered areas. Do not use this
appliance on top of any wood covered deck or walkway area. Doing so may cause the wood surface to catch on fire
leading to property damage or personal injury.
This fire ring can only be used outdoors in open areas.
Maintain a minimum of 10 feet, horizontally, between this fire ring and any building structure or vehicle.
Do not attempt to transport this fire pit while hot or when a fire is burning in it.
Unfinished Steel
The surface of this fire ring is unfinished and will overtime develop a rich rust-colored patina. This is completely natural and
normal.
Hot Surfaces are Normal
Be aware that the surfaces of this fire ring can be too hot to touch. This level of surface temperature is considered normal and does
not indicate any hazardous situation. Use protective gloves when handling hot parts.
After each use, wait for the fire to burn out and cool completely before attempting to remove the ashes.
Table of Contents
1 General Information……………………………………...2
1.1
Safety Warnings……………………………………….2
1.2
Assembly and Operating Instructions……….………...4
1.3
Warranty Policy Statement………………………...….7
1.3.1
Conditions………………………………………7
1.3.2
Exclusions……………………..……..7
1.3.3
Limitations of Liability………………8
1.3.4
How to Obtain Warranty Service….…8
1.4
Owner Registration………………………….9
