ExtraHop 8.8 ExtraHop Trace Admin UI Guide
48
Configure the system time
By default, the ExtraHop system synchronizes the system time through the *.extrahop.pool.ntp.org
network time protocol (NTP) servers. If your network environment prevents the ExtraHop system from
communicating with these time servers, you must configure an alternate time server source.
1. Log in to the Administration settings on the ExtraHop system through
https://<extrahop-
hostname-or-IP-address>/admin
.
2. In the
Appliance Settings
section, click
System Time
.
3. Click
Configure Time
.
4. Select your time zone from the drop-down list then click
Save and Continue
.
5. On the Time Setup page, select one of the following options:
•
Set time manually
Note:
You cannot manually set the time for systems that are managed by a Command
appliance or Reveal(x) 360.
•
Set time with NTP server
6. Select
Set time with NTP server
and then click
Select
.
The ExtraHop time servers,
0.extrahop.pool.ntp.org
,
1.extrahop.pool.ntp.org
,
2.extrahop.pool.ntp.org
, and
3.extrahop.pool.ntp.org
appear in the first four Time
Server fields by default.
7. Type the IP address or fully qualified domain name (FQDN) for the time servers in the Time Server
fields. You can have up to nine time servers.
Tip:
After adding the fifth time server, click
Add Server
to display up to four additional timer
server fields.
8. Click
Done
.
The NTP Status table displays a list of NTP servers that keep the system clock in sync. To sync the current
system time a remote server, click the
Sync Now
button.
Shutdown or restart
You can shut down or restart the Trace appliance in the Administration settings.
1. In the Appliance Settings section, click
Shutdown or Restart
.
2. In the Actions column, select one of the following options:
•
Click
Restart
and then on the confirmation page, click
Restart
to restart the appliance.
•
Click
Shutdown
, and then on the confirmation page, click
Shut down
to shut down the system and
power off the appliance.
License
The Administration settings provide an interface to add and update licenses for add-in modules and other
features available in the ExtraHop system. The License Administration page includes the following licensing
information and settings:
Manage license
Provides an interface to add and update the ExtraHop system
System Information
Displays the identification and expiration information about the ExtraHop system.
Features
Displays the list of licensed features and whether the licensed features are enabled or disabled.
Содержание Trace Admin UI
Страница 1: ...ExtraHop 8 8 ExtraHop Trace Admin UI Guide...
