Extec I-C13 Impactor, Руководство по эксплуатации и техническому обслуживанию

Страница: 65 / 292

Ver: IC13-EN-10567 Machine Maintenance Page 55
I-C13 Impactor
5.3.2 Checking/ Changing Hydraulic Tank Air Breather
5.3.3 Greasing Bearings
Extec Screens & Crushers Ltd use SKF sealed-for-life bearings that reduce grease
consumption, lower life cycle cost, lower recycling costs and reduce pressure on the
environment. The results are dramatically increased up-time for the machines and the
consequent reduction in maintenance costs. Only apply grease where otherwise indicated.
Using suitable equipment, the following bearings must be greased every week. See following
pictograms for details of grease points.
If the service indicator is green, it is time to
replace the tank air breather. Simply remove
air breather and replace with new one.
Note: If optional oil cooler is fitted, then it must
be in the raised position & cover plate
removed to access the air breather.
1: Raise cover plate and examine service
indicator.
WARNING: NEVER USE GREASE CONTAINING MOLYBDENUM.
DOING SO MAY CAUSE DAMAGE TO MACHINE PARTS
AND WILL INVALIDATE ANY WARRANTY.
1: Torque Arm motor bearings 2: Torque Arm shaft bearings