EXT Racing Shox ARMA V3, Руководство по обслуживанию

Страница: 47 / 54

Service manual Arma v3 / Storia v3 [V1.5]
2.5.4 Non-ordinary service: Lenght / travel change (Arma V3/Storia V3)
On this pharagraph is possible to nd instructions for making a correct lenght/stroke change for the Arma
V3 / Storia V3 models. A change of size is always a delicate operation and the induividuation and choice of
correct spare parts is foundamental for a good and proper job. You may need only some of the steps below,
depending on the conversion needed.
Descrizione Illustrazione Strumenti
#1 - Following the istruc-
tions about standard ser-
vices (type A and B)
remove HBC, specs, pi-
ston and piston-holder, re-
bound needle, compres-
sion valve, LOK, IFP and
reservoir cover.
#2 - Fix the shaft on
the bench-wise with cor-
rect tooling. Heat to
∼
=
200°C the thread zo-
ne to solve the loctite and
remove the eyelet.
ˆ TL0326-14
ˆ TL0383
ˆ Industrial
heater
45