If you are ready with the jumper settings for the EX-11063V, please proceed with the following
installation instructions. Because there are large differences between PC’s, we can give you only a
general installation guide for the EX-11063V. Please refer your computer’s reference manual
whenever in doubt.
1. Turn off the power to your computer and any other connected peripherals.
2. Remove the mounting screws located at the rear and/or sides panels of your Computer and
gently slide the cover off.
3. If your pc case do have a front panel please follow the instructions at J7 above. Normally
the cables should be marked if not please ask the front panel manufacturer
4. If necessary please install now the external power supply to the card like shown at JP1 & J6
above.
5. Locate an available PCI-Express expansion slot and remove its covers from the rear panel of
your computer.
6. Align the EX-11063V with the expansion slot, and then gently but firmly, insert the card. Make
sure the card is seated and oriented correctly.
7. Then connect the card with a screw to the rear panel of the computer.
8. Gently replace your computer’s cover and the mounting screws.
HARDWARE INSTALLATION
6
5
EX
EX
EX
-
-
-
11063V
11063V
11063V
English
English
English
EX
EX
EX
-
-
-
11063V
11063V
11063V
English
English
English
1
Die EX-11063V ist eine USB 2.0 PCI-Express Karte. Sie ist mit 2 externen und 2 internen Ports
(eine interne A-Buchse und ein 10Pin Stecker für Frontpanels) ausgestattet. Sie unterstützt alle
PCI-Express Slots von x1 bis x16. Der serielle PCI-Express Bus unterstützt optimal die Leis-
tung des schnellen NEC Chipsets. Die EX-11063V gewährleistet so eine sichere Datenübertra-
gung und exzellente Performance von bis zu 480Mbit pro Sekunde! Es ist nicht möglich die I/O
Adressen und Interrupts manuell einzustellen, da die Einstellungen der Karte vom System
(BIOS) und beim installieren des Betriebssystems automatisch vorgenommen werden. Bei der
EX-11063V handelt es sich um eine Karte bei der die USB Anschlüsse fest verschraubt werden
können.
BESCHREIBUNG & TECHNISCHE DATEN
AUFBAU
Kompatibilität:
PCI-Express x1 bis x16
Betriebssysteme:
WIN 9.x/ ME/ 2000/ Server 2003/ XP/ Vista/ 7/ 8/ MAC/ (Linux vom OS)
Anschlüsse:
2x USB A-Buchse extern, 1x USB A-Buchse intern, 1x 10 Pin Stecker
Lieferumfang:
EX-11063V, Treiber CD, Anleitung
Zertifikate:
CE
CE
CE
CE
/ FCC / RoHS / WEEE DE97424562 / WHQL
Windows 2000/ Server 2000
Should you use Windows 2000 with service pack 4 you don’t need any drivers. The drivers are
already integrated in Windows and the EX-11063V will be installed automatically.
Should you use Windows 2000 without service pack 4 please insert the driver CD into your CD-
ROM drive (for example D:\ ) and open the folder D:\USB 2.0\NEC\WIN2K on the CD.
Now start the file “U2v2_1.exe“ and follow the setup program to finish installation process.
After that shut down your computer and follow the instructions for the Hardware installation.
After installing the card simply start your computer and the card will be recognized automatically
by your system.
CHECK INSTALLED DRIVER
Open the >Device Manager< . Now you should see at „USB Devices“ the following new entrys:
<NEC USB Open Host Controller> <PCI USB 2.0 Host Controller> <USB 2.0 Root Hub
Device> <USB Root Hub>.
If you see this or a similar information the EX-11063V is installed correctly.
Windows XP/ Server 2003
Should you use Windows XP with service pack 2 or 3 you don't need any drivers. The drivers
are already integrated in Windows and the EX-11063V will be installed automatically.
Should you use Windows XP or without any service pack or Server 2003 please insert the
driver CD into your CD-ROM drive (for example D:\ ) and open the folder D:\USB
2.0\NEC\WINXP on the CD.
Now start the file “U2v2_1.exe“ and follow the setup program to finish installation process.
After that shut down your computer and follow the instructions for the Hardware installation.
After installing the card simply start your computer and the card will be recognized automatically
by your system.
CHECK INSTALLED DRIVER
Open the >Device Manager< . Now you should see at „USB Devices“ the following new entrys:
<NEC USB Open Host Controller> <PCI USB 2.0 Host Controller> <USB 2.0 Root Hub
Device> <USB Root Hub>.
If you see this or a similar information the EX-11063V is installed correctly.
Windows Vista/ 7/ 8
Should you use Windows Vista, 7 or 8 the OS will recognize the device automatically and install
the drivers.
CHECK INSTALLED DRIVER
Open the >Device Manager< . Now you should see at „USB Devices“ the following new entrys:
<NEC USB Open Host Controller> <PCI USB 2.0 Host Controller> <USB 2.0 Root Hub
Device> <USB Root Hub>.
DRIVER INSTALLATION
DRIVER INSTALLATION
JUMPER EINSTELLUNG & ANSCHLÜSSE
Windows 98/ ME
Please insert the driver CD into your CD-ROM drive (for example D:\) and open the folder
D:\USB 2.0\NEC\WIN9.x on the CD.
Now start the file “U2v2_1.exe“ and follow the setup program to finish installation process.
After that shut down your computer and follow the instructions for the Hardware installation.
After installing the card simply start your computer and the card will be recognized automatically
by your system.
CHECK INSTALLED DRIVER
Open the >Device Manager< . Now you should see at „USB Devices“ the following new entrys:
<NEC USB Open Host Controller> <PCI USB 2.0 Host Controller> <USB 2.0 Root Hub
Device> <USB Root Hub>.
If you see this or a similar information the EX-11063V is installed correctly.
JUMPER SETTING & CONNECTORS
PCI = Strom vom PCI-Express BUS (Werkseinstellung)
AUX = Strom vom PC-Netzteil des Rechners
(Zur Entlastung des Mainboards und zur stabilen Stromversorgung
bei Verwendung von Endgeräten mit hohem Stromverbrauch).
Anschluss J6 muss mit PC-Netzteil verbunden werden!
JP1:
P=PCI
A=AUX
NEC Chipset
J3-J4:
2 x externe
USB 2.0 A-Buchse
J2: 1 x interne
USB 2.0
A-Buchse
J7: 2 x interner 10Pin USB Port
für Frontpanel Anschluss
J6:
Anschluss für Stecker
vom PC-Netzteil
JP1:
Stromquelle wählen
PCIe oder AUX
PCI-Express Bridge
J6:
Wenn JP1 auf AUX gestellt ist, muss J6 mit dem Stromanschluss vom
PC Netzteil verbunden werden! Bitte auf die richtige Polarität achten!
Achtung! Stecker nie bei eingeschaltetem PC ein oder ausstecken!
J2-J4:
Achtung!
Sollten Sie beide internen
Anschlüsse von J7
verwenden, können Sie
die interne USB A-Buchse
J2 nicht verwenden!
+5VCC
Data1-
Data1+
GND
+5VCC
Data2-
Data2+
GND
1
3
5
7
9
10
J7:
Pin
Signal
Pin
Signal
Pin
Signal
1
VCC1 +5V
5
DATA1+
9
NC
2
VCC2 +5V
6
DATA2+
10
NC
3
DATA1-
7
GND1
USB 2.0 - 10 pin connector (Default)
4
DATA2-
8
GND2
2
4
6
8
Attention!!!
Please make sure that you connect the cable in the right
order like shown in the list above. If you connect the cable
wrong it can destroy your hardware! The labelling on the
cable must match with the ones on our card.
If you use the internal USB A-Port J2, you can use only one
of the ports from the 10 pin connector J7!
Attention! If you use Windows 98, ME, 2000 without service pack 4 or XP without service
pack. Please install the drivers for the EX-11063V at first.
If you use Windows 2000 including service pack 4, XP including service pack 2 or 3,
Vista, 7 or 8 and if you already installed the drivers please proceed with the following
instructions for hardware installation.
Bedienungsanleitung
Bedienungsanleitung
Vers. 1.3 / 04.03.13
1 +5V
2 GND
3 GND
4 +12V
USB 2.0 Pin‘s
Pin
Signal
1
VCC
2
DATA-
3
DATA+
4
GND
