CHARGING
LIGHT OPERATION
BATTERY FEEDBACK
Charge your light fully before first use
1. Insert Exposure Lights charger cable.
2. The bi-colour battery indicator (inside the lens) will flash green whilst charging.
3. When the battery is fully charged the LED will turn solid green.
4. Charge time 2 hours from a 1500mA power source.
USER GUIDE
HT 500
•
HT GO
The bi-colour battery indicator is located in the lens. It will indicate the remaining battery percentage for 5
seconds after the light has been switched off.
Low Voltage Flash
When your light‘s battery runs below 10% the front white light will triple flash
once
.
BI-COLOUR BATTERY INDICATOR
BATTERY %
GREEN
100 - 50
AMBER
50 - 25
RED
25 - 10
RED FLASH
10 - EMPTY
LIGHT OPERATION
ACTION
SWITCH ON
DOUBLE PRESS THE BUTTON
CHANGE MODE
SINGLE PRESS THE BUTTON
SWITCH OFF
PRESS AND HOLD THE BUTTON FOR 3 SECONDS
FLASH
FROM ON PRESS AND HOLD THE BUTTON FOR 4 SECONDS
SOS
FROM ON PRESS AND HOLD THE BUTTON FOR 6 SECONDS
EXPUG12.1.indd 1
EXPUG12.1.indd 1
12/12/2019 15:34
12/12/2019 15:34
