Expolite led22940, Руководство пользователя

Страница: 20 / 28

PWM: gives the user the possibility to adjust the PWM frequency of the leds ( 600Hz/1200Hz/2000Hz /
4000Hz / 6000Hz / 25000Hz ).
FULL POWER CCT: sets the colour temperature at maximum output. 3200K/4200K/5600K/10000K
and NORMAL can be set.
Activate Password Protection
In the menu KEY the password protection of the fixture is activated or deactivated. If set ON the
fixture is password protected when started. 30 seconds after the last setting the menu is locked
again. To be able to make changes in the menu the password
UP - DOWN - UP - DOWN - ENTER
needs to be typed in.
MENU
PERSON HSIC KEY ON
HSIC OFF
MENU
Calibration and Whiteadjustment
PERSON
CALIB.C WHITE WH.01 2700K
3000K
8000K WH.12
o
o
o
RGBtoW R(0 - 255)
G(0 - 255)
B(0 - 255)
****
CALR OK
o
o
o
WH.02
In the menu CALIB.C the calibrations and whiteadjustments can be set.
In the submenu WHITE the preset colour temperatures for the white values are stored.
In the submenu RGBtoW a custom colour calibration is stored which limits the maximum brightness
of the colour channels at the DMX value "255".
NOTE: The maximum value can be limited to 0. In this case, a colour channel does not respond
to a sent DMX value, which can be misinterpreted as a device error.
To reset the changes made to the colour temperature presets to factory default, the setting
CALR needs to be confirmed with the default password UP - DOWN - UP - DOWN -
ENTER.
Info Menu
MENU
In the info menu ( INFO ), submenu VERS the currently installed firmware version is shown.
PERSON HSIC INFO VERS V01
E-28