Expolite FesnelLED WW Large, Руководство пользователя

Страница: 20 / 22

SLOCK: Settings Lock. In this menu is set whether the menu SET is only accesable after entering the
password ( ON ) or without a password ( OFF ).
DMX ERROR: sets how the fixture responses if DMX-signal gets lost. Set SAVE to hold the last
received value or BLACK for blackout.
RESET : sets all editable settings back to factory default
ZOOM: in this menu the standard start position ( POS1 ), end position ( POS2 ) and the home position
( BASE ) of the motorised zoom are set.
PERFORMANCE: gives the user the opportunity to change the performance of the fixture between
LIVE , STUDIO and POWER.
MODE Setting: sets if the fixture is a master and sends data to other fixtures ( MASTER ), or not
( SELF ).
PWM: gives the user the possibility to adjust the PWM frequency of the leds ( 600Hz/1200Hz/2000Hz /
4000Hz / 6000Hz / 25000Hz ).
CURV dimming
1: OFF
2: Cv1
3: Cv2
4: Cv3
1
2
3
4
(100%)
CURV: In curve menu, the dimmercurves are set as shown below.
MENU
Zoom - Calibration
PERSON CALIBRATION HSIC
****
CALZ HSIC SEND
****
HSIC 0 - 255 POS1
HSIC SEND
****
HSIC 0 - 255 POS2
In the calibration menu ( CALIBRATION ), submenu CALZ the general minimum ( POS1 ) and
maximum position ( POS2 ) of the motorised zoom can be set.
Info Menu
MENU
In the info menu ( INFO ), submenu VERS the currently installed firmware version is shown.
PERSON
HSIC INFO VERS V01
E-20