Explore Scientific 0116950, Инструкция по эксплуатации

Страница: 10 / 20

10 / 20
12 Mounting the stray light shield
Illustration 6: Mounting the stray light shield
1. Place the stray light shield opposite the eyepiece extension with the recesses over the adjusting
screws of the secondary mirror cage.
2. Screw the stray light shield with the 4 short white flat-head screws to the interception mirror cage.
3. Carefully pull the stretchable light shroud* over the boom from the top to the bottom.
Not included in scope of delivery, optionally available
13 Mounting the viewfinder scope
Illustration 7: Mounting the viewfinder scope
NOTICE! The safety mirror cage is equipped with two viewfinder slots (A and B), so that the
viewfinder scope can be mounted according to the different viewing position.
1. Loosen the fixing screws on the desired viewfinder slot.
2. Slide the viewfinder telescope with the guide rail into the desired viewfinder slot (A or B).
3. Carefully hand-tighten the fixing screws on the viewfinder slot.