52
13.5.2 TOP VIEW
14 STORAGE AND MAINTENANCE
The X2 Wave Flamers surfaces should be cleaned after every show. A normal cleaning cloth and
grain alcohol can be used to clean all outer components until no dirt is visible.
If soot settles on the ignition electrodes, they can be cleaned carefully using an old toothbrush. The
cables of the electrodes should be checked periodically for any obvious damages.
If stored for a longer duration (> 1 month) the Wave Flamer should be used for a moment, to lubricate
the inner system and prevent the pumps from drying out, as well as preventing parts from corroding.
The X2 Wave Flamer may never be stored will pressurized or
in armed mode. Due to safety reasons, we recommend
storage with 1L of fluid in the canister, which should prevent
an unwanted and harmful pressurizing of the pumps without
fluid.
Direction
10m-nozzle
5m-nozzle
A (Roof)
15 m (49,2 ft) *)
7 m (23 ft) *)
B (To the sides)
14 m (45,9 ft) *)
6 m (19,7 ft) *)
C = D (Front and back)
3,5 m (11,5 ft) *)
2,5 m (8,2 ft) *)
Содержание X2 Wave Flamer
Страница 19: ...19 ...
Страница 60: ...Contact the manufacturer office explo at or by phone at 43 0 463 32 245 ...
