GELFREE 8100 Fractionation System
(
6 of 30
)
Unpacking and Placement
Unpacking and Inspection of Parts
Upon receipt of your GELFREE 8100 Fractionation Station, open
the box, carefully remove the foam packaging, and remove the
instrument and power cord from the box.
Remove the tape securing the lid, along with the protective plastic,
so that the lid can operate freely. The instrument could have been
damaged during shipment. Inspect the instrument case, lid and
hinges, and electrodes for any obvious signs of damage. If damage
has occurred, please notify Customer Service immediately.
Instrument Placement
The
GELFREE 8100 Fractionation Station includes a high voltage
power supply and electronics that are sensitive to moisture,
extreme temperature, and electromagnetic interference. Heat
generated when using the instrument is dissipated using a series of
fans in the rear of the instrument. Proper airflow must be ensured to
avoid overheating of the instrument during operation. As such, the
instrument should be placed on a level table or laboratory bench
removed from routine handling of liquid reagents. The minimum
recommended space is 24” W x 24” D x 18” H allowing for 8” of
unobstructed space behind the instrument.
Figure 1.
Proper Instrument Placement.
© 2013 Expedeon, Inc. All Rights Reserved.
