EXPANSION ELECTRONIC ECOKITCHEN 1 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 24

EXPANSION ELECTRONIC ECOKITCHEN 1 Скачать руководство пользователя страница 4

4

1.

ECOKITCHEN ELECTROSTATIC PURIFIER

The ECOKITCHEN cleaner, as it is supplied, cannot be used directly, but must be completed by all the other
elements that allow air collection and channelling.
The machine provides the electrostatic filter section and the deodorising activated carbon section for
purification and the electric fan for air intake. All other elements (channels, hoods, cabins, etc.) must be
provided on site by the user.

MACHINE COMPONENTS

The machine is composed of:
A - Structure containing the filters and the DEOX system
B - Structure containing the activated carbons and the fan
C - electric panel
D - screws and gasket kit
E - filtered air outlet

A - front and rear views

B - front and rear views

C - view of electric panel with brackets for wall
mounting

D - screws and gasket kit for coupling

For the commissioning, the two sections of FilDEOX and Fan must be joined together by
the special screw kit so as to form a single structure. The two sections are then joined together by the
special multipolar connector.

«
...
2
3
4
5
6
...
»

Содержание ECOKITCHEN 1

























Отзывы:

Нет отзывов