5
English (original instructions)
EN
FR
DE
ES
IT
PT
NL
SV
DA
NO
FI
HU
CS
RU
RO
PL
SL
HR
ET
LT
LV
SK
BG
#'
Read and understand all instructions.
Failure to follow all instructions listed below,
may result in electric shock, fire and/or serious
personal injury.
This attachment is suitable for use with petrol
power heads ONLY.
This attachment is NOT suitable for use with
petrol power heads facilitated by biker handles.
#'
T H I S H E D G E T R I M M E R C A N C A U S E
SERIOUS INJURIES. Read the instructions
carefully for the correct handling, preparation,
maintenance, starting and stopping of the hedge
trimmer. Become familiar with all controls and
the proper use of the hedge trimmer.Become
familiar with the owner's manual before
attempting to operate the equipment.
SAVE THESE INSTRUCTIONS.
INTENDED USE:
This product should only be operated outdoors in a well
ventilated area.
This product is intended to cut and trim hedges, shrubs
and similar vegetation. It is NOT intended to cut grass,
trees or branches. It should not be used for any other
purpose than hedge trimming.
GENERAL SAFETY RULES
Q
For safe operation, read and understand all
instructions before using the straight shaft trimmer
attachment. Follow all safety instructions. Failure to
follow all safety instructions listed below, can result in
serious personal injury.
Q
Do not allow children or untrained individuals to use
this unit.
Q
Wear safety glasses or goggles that are marked to
comply with EN 166 standards and hearing protection
when operating this unit.
Q
Wear heavy long pants, boots, and gloves. Do not
wear loose fitting clothing, short pants, jewelry of any
kind, or go barefoot.
Q
Secure long hair so it is above shoulder level to
prevent entanglement in any moving parts.
Q
Keep all bystanders, children, and pets at least
15 m away. Avoid operating while people, especially
children, are nearby.
Q
Do not operate this unit when you are tired, ill,
or under the influence of alcohol, drugs, or medication.
Q
Do not operate in poor lighting.
Q
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance or
exposure to hot surfaces.
Q
Keep all parts of your body away from any moving part.
Q
Do not touch areas around the muffler or cylinder of
the power head, these parts get hot from operation.
Failure to do so could result in possible serious
personal injury.
Q
Always stop the engine and remove the spark plug
wire before making any adjustments or repairs except
for carburetor adjustments.
Q
Inspect unit before each use for loose fasteners,
damaged or missing parts. Correct before using the
straight shaft trimmer attachment. Failure to do so
can cause serious injury.
Q
Check for damaged parts. Before further use of
the appliance, any part that is damaged should be
carefully checked to determine that it will operate
properly and perform its intended function. Check
for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other
conditions that may affect its operation. A guard
or other part that is damaged should be properly
repaired or replaced by an authorized service center.
Q
Use only original manufacturer’s replacement parts.
Failure to do so, may cause poor performance,
possible injury, and will void your warranty.
Q
Do not, under any circumstance, use any attachment
or accessory on this product which was not provided
with the product or identified as appropriate for use
with this product in the Operator’s Manual.
Q
Please refer to the Related power head manual on
the below requirement:
1. Instructions of how to set the carburetor and ignition ;
2. instructions giving detailed explanations of all
controls;
3. instructions for safe handling of fuel;
4. the essential characteristics of tools which can be
fitted to the machinery;
5. the operating method to be followed in the event of
accident and breakdown;
6. where a blockage is likely to occur, the operating
method to be followed so as to enable the equipment
to be safely unblocked
This attachment is approved for use with all Ryobi /
Homelite petrol driven power heads of 30cc or less.
