Exit Stopper
®
Quick Install
STI-6400 Series
Rely on STI
®
SET UP
1.
Key in OFF position
3.
Remove cover from base,
push on lock to separate
5.
Unwrap battery
and connect
6.
Terminal block (for remote and
relay options) – refer to full install
online for wiring connections
7.
Test – place magnet next to reed, turn on,
separate magnet from reed
8.
Apply language label if desired
1
2
4.
Choose setting – refer
to switch table, default
settings shown side 2
ON
OFF
LED
DO NOT TOUCH
LED -
Do Not Touch
2.
Remove security screw with
provided wrench
