GREAT BRITAIN
For consumer contact, please visit www.clasohlson.co.uk and click on customer service.
Bluetooth Stereo Headset
Article number 18-2066 / 36-2751
Safety
-
Check local laws concerning use of mobile telephones in combination
with driving a car.
-
Turn off both the headset and the mobile telephone, when you are
in areas, where you are asked to turn off your mobile telephone, for
example in hospitals, airports, or areas, where there is a risk of explosion.
-
Do not use a faulty mains adapter. There is a risk of electrical shock.
Product description
Wireless stereo headset with Bluetooth® technology.
-
Up to 6.5 hours of listening to music.
-
Charger included.
Note! Using the music listening function requires that your mobile telephone
supports A2DP or AVRCP, see your mobile telephone’s manual.
Buttons and functions
Getting started
Charging the battery
1. First connect the charger to the headset and then to a 230 V wall socket.
The red charging indicator on the headset lights up.
2. When the charging is finished, the charging indicator turns off. Remove
the charger from the headset. The first time takes about 4 hours to
charge the battery fully, after that it takes about 2 hours.
Using
Taking and terminating a call
1. A ring tone is heard in the headset upon incoming calls. Press to
answer the call.
2. Use “+” and “-” to adjust the volume in the headset.
3. To terminate the call, press and hold in for at least one second.
Playing music from the mobile telephone
Note! The mobile telephone must support A2DP as well as AVRCP in order
for the music function to be used. See the mobile telephones manual.
1. Connect the headset to the mobile telephone.
2. Start music playback on the mobile telephone. The sound comes out in
the headset.
3. The music is turned down upon incoming calls and a ring tone is heard in
the headset. Press to answer the call.
4. To terminate the call, press and hold in for at least a second. The
music resumes.
Errors
The indicator blinks with a red light
The headset needs to be recharged. Connect the charger to the headset and
let the charger sit until the indicator turns off.
Pairing the headset with the mobile telephone does not work
Make sure that the headset and the mobile telephone are fully charged and
try to connect again. Also check that the distance between the units is a
maximum of 10 meters and that there are no disrupting objects or electronics
between them.
-
If none of the above solves the problem, consult your mobile telephones’
manual.
Disposal
When you need to dispose of the product, you must follow local instructions.
If you are not sure of these, contact your local authority.
Specifications
Speaking time:
Up to 6.5 hours
Charging time:
2 hours (Note! Charge for 4 hours the first time)
Bluetooth specification:
2.0
Range:
Up till 15 m
Weight:
50 g
1. On and Off switch / Connect
/ Answer and terminate call /
Playback, pause, and stop the music
2. Increase volume / call back
3. Decrease volume / voice call
4. Next trace / Forward
5. Previous track / Reverse
6. Microphone
7. Connection to charger
Overview of the buttons’ functions
Function
Button Duration
Light indication
Turn on
Long button press (2-3 seconds) Blue blinking light
Turn off
Long button press (2-3 seconds) Red light
Connected mode
Long button press (4 seconds)
(PIN-code: ”0000”)
Blinking blue & red
Successful con-
nection
Blinking blue light
Answer and termi-
nate call
Short button press
Call back
+
Long button press (2 seconds)
Voice call
-
Long button press (2 seconds)
Reject call
Long button press (3 seconds)
Playback, pause,
and stop the music
Short button press
Volume up/down
+/-
Short button press
Forward/Back
◄◄ / ►►
Short button press
Weak battery
Blinking red light
Current charging
Up to 4 hours
Red light
Fully charged
No light
Mounting the brace
-
Hold the headset with both hands. Place the brace behind the head and
then place the ear brace over the ear (see the pictures).
Turning the headset on and off
1. Press button 1 for about three seconds to turn the headset on. The blue
light indicator starts blinking. The headset is not turned on.
2. To turn off the headset, press for about three seconds. Two audible
signals are emitted and the red light indicator starts blinking. The
headset is now turned off.
Pairing
1. Make sure that the headset is turned off. Then press
for about 4 seconds until the light indicator changes
between blue and red light. The headset is now in the
mode for pairing.
2. Activate the mobile telephone’s Bluetooth connection.
See your mobile telephone’s manual.
3. The mobile telephone must now find the headset in the unit list. Mark the
headset in the list and select it for connection.
4. When you are asked to give the PIN code, enter ”0000” to complete the
pairing. The light indicator blinks with blue light and the headset is not in
stand-by mode.
5. In certain cases you may need to create a connection between the
headset and the mobile telephone during this mode. See the manual for
your mobile telephone.
Note!
-
If the headset is not in the mode for pairing, the mobile telephone cannot
find the headset, so check that the headset is in the mode for pairing
before you start the connection.
-
If the unit has not created a connection within a minute, stop the pairing
process. Redo the procedure.
ENGLISH
