Spinner (2)
Nut (2)
Cylinder
Solar Unit
OPERATION
• ON/OFF: The unit is shipped in the OFF position. Locate the ON/OFF switch on the
bottom of the unit and slide it into the ON position. In the ON position, the solar cell
will light up automatically at night and will shut OFF automatically when the solar
panel is exposed to daylight.
• Location: Select a sunny location, charge for at least a day to fully charge the
battery. The more direct sunlight your new solar light is exposed to during the day,
the longer the light will operated in the evening. After charging (charge for at least 8
hours in direct sunlight), the LED light will light up automatically at night.
Middle Pole
Top Pole
Stake Base
Step 1:
Place solar unit (C) into cylinder (D) by turning it to
the right until firmly tightened.
Step 2:
Insert spinner (A) into cylinder (D) by inserting into
opening.
F
G
Assembly Instructions
