EXFO T200S, Руководство пользователя, Страница: 78 / 146

SCPI Command Reference
72
T200S
General Commands
General Commands
*CLS
Description The *CLS command clears the Standard Event Status Register and
the Error/Event Queue.
Type Overlapping, no query.
Syntax
*CLS
Parameter(s) None.
See Also
*ESR?
on page 74
*ESE
Description The *ESE command sets the Standard Event Status Enable
Register bits, as defined in
Standard Event Status Enable Register
(ESE) and Standard Event Status Register (ESR)
on page 46.
This register contains a mask value for the bits to be enabled in
the Standard Event Status Register.
Type Overlapping.
Syntax *ESE<wsp><register value>
Parameter(s) register value:
The <register value> represents the bit values of the Standard
Event Status Enable Register, in the range of 0 through 255.
See the content of this register in
Standard Event Status Enable
Register (ESE) and Standard Event Status Register (ESR) on
page 46.
A value of 1 in the Enable Register enables the corresponding bit
in the Status Register, a value of 0 disables the bit.
Example(s)
*ESE 25
where 25 sets the EXE, DDE and OPC bits)
*ESE 0
clears the content of the Standard Event Status Enable register
See Also *ESE? on page 73
*ESR? on page 74