EXFO T200S, Руководство пользователя, Страница: 59 / 146

Tunable Laser Source
53
8 Maintenance
To help ensure long, trouble-free operation:
³
Always keep the unit and its surroundings clean, free of dust and dirt, even if you are
not using it.
³
Keep the unit free of dust.
³
Clean the unit casing and front panel with a cloth slightly dampened with water.
³
Store the unit at room temperature in a clean and dry area, free of dust and out of direct
sunlight.
³
Avoid high humidity or significant temperature fluctuations.
³
Avoid unnecessary shocks and vibrations.
³
If any liquids are spilled on or into the unit, turn off the power immediately, disconnect
from any external power source and let the unit dry completely.
Cleaning the T200S
Cleaning the Cover of the T200S
If the external cover of the T200S becomes dirty or dusty, clean it by following the
instructions below.
Material needed:
³
Cleaning cloth
³
Isopropyl alcohol
To clean the external cover of the T200S:
1.
Turn the T200S off (see Turning off the T200S on page 18) and unplug the power supply
cable from the wall socket.
2. Slightly damp the cloth with an isopropyl alcohol liquid and gently swipe dirt and dust
on the external cover of the T200S, without applying excessive force onto it.
W
ARNING
The use of controls, adjustments and procedures, namely for operation and
maintenance, other than those specified herein may result in hazardous radiation
exposure or impair the protection provided by this unit.
C
AUTION
Do not use chemically active or abrasive materials to clean the T200S.