EXFO PPM-350C Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 47

EXFO PPM-350C Скачать руководство пользователя страница 39

PPM-350C

33

Contacting the Technical Support Group

To obtain after-sales service or technical support for this product, contact EXFO at
one of the following numbers. The Technical Support Group is available to take your
calls from Monday to Friday, 8:00 a.m. to 7:00 p.m. (Eastern Time in North America).
For detailed information about technical support, visit the EXFO Web site at

www.exfo.com

.

To accelerate the process, please have information such as the name and the serial
number (see the product identification label), as well as a description of your
problem, close at hand.

You may also be requested to provide the embedded software’s version numbers.

To display the embedded software version:
1.

Hold down

and press

at the same time. The unit displays the main

software version.

2.

Press

to return to your previous mode.

Technical Support Group

400 Godin Avenue

Quebec (Quebec) G1M 2K2

CANADA

1 866 683-0155 (USA and Canada)

Tel.: 1 418 683-5498

Fax: 1 418 683-9224

[email protected]

Threshold/





«
...
37
38
39
40
41
...
»

Содержание PPM-350C
















































Отзывы:

Нет отзывов