EXFO Power Blazer 88000 Series, Руководство пользователя

Страница: 475 / 803

Test Results
Power Blazer
463
Service Performance
Note: For the Current value, 0 is displayed when no RX rate has been measured
in the last second.
Note:
Delay variation measurements smaller than 15 μ s will be discarded, not
used for the sampling process, and < 0.015 is displayed as the minimum
value. For the Current value, Not measurable is displayed when no delay
has been measured in the last second..
Errors
For
Dual Test Set
, errors are reported for both local to remote (
L->R
) and
remote to local ( R->L ). For Dual Port topology, errors are reported for both
P1 to P2 (
P1->P2
) and P2 to P1 (
P2->P1
).

Frame Loss indicates that a sequence number is missing in the
received frames. The pass/fail verdict when enabled reports only the
verdict when it is fail.
Seconds , Count , and Rate values are reported.

Out-of-Sequence
indicates that the received frame sequence number
is either smaller than the expected frame sequence number or is a
duplicate number. The Out-Of-Sequence will not be considered in the
global verdict.
Seconds , Count , and Rate values are reported.
RX Frame Count
The RX Frame Count indicates the number of frames received matching
the selected service ID. For
Dual Test Set
, the count is reported for both
local to remote ( L->R ) and remote to local ( R->L ). For Dual Port topology,
the count is reported for both P1 to P2 (
P1->P2
) and P2 to P1 (
P2->P1
).