EXFO MAX-630G, Руководство пользователя

Страница: 50 / 160

Setting Up DSL/IP Tests
44
MAX-630G
Test Configuration
Test Configuration
The MaxTester supports 3 types of test applications:
Auto Test
,
Manual
Test , and Ethernet Test . Configuration parameters for all 3 test applications
are saved into a test configuration profile. A default profile is provided with
a predefined set of parameters for all test applications.

Select Profile
lists saved available profiles. The
current active profile is shown in the upper
information header. At power up, settings are read
from the last loaded profile.

Profile Details
lists the 3 types of tests for
configuration:

Auto Test Setup

Manual Test Setup

Ethernet Test Setup

Copy to USB allows you to copy all profiles found
in the internal memory to an external USB device.
If the profile name already exists in the destination folder, Copy (x) will
be appended to the profile name, where x corresponds to the number
of copies starting from 1.

Copy from USB
allows you to copy all profiles found on an external
USB device to the unit.

Delete Profile
allows you to delete a profile (except the default profile)
on the unit.

Profile Default
resets the current test setup to the factory default
profile. If selected, a dialogue box pops up to confirm that all single
and auto test settings will revert to factory test settings.

Save Profile opens the alphanumeric editor screen allowing you to
create a new profile name and copy all parameters from the currently
loaded profile.