manualshive.com logo in svg

EXFO MAX-630G, Руководство пользователя

Поделиться
Скачать
EXFO MAX-630G Скачать руководство пользователя страница 137

G.fast/VDSL2/ADSL2+ Multi-play Test Set

131

8

Maintenance

General Maintenance

The MaxTester has been designed to be a rugged and lightweight piece of 
test equipment. The MaxTester LCD display should only be cleaned using a 
soft, lint-free cloth and an anti-static cleaning solution. Ordinary detergents 
and other cleaning solutions may cloud or scratch the surface and should 
be avoided.

To help ensure long, trouble-free operation:

Keep the unit free of dust.

Clean the unit casing and front panel with a cloth slightly dampened 
with water.

Store unit at room temperature in a clean and dry area. Keep the unit 
out of direct sunlight.

Avoid high humidity or significant temperature fluctuations.

Avoid unnecessary shocks and vibrations.

If any liquids are spilled on or into the unit, turn off the power 
immediately and let the unit dry completely.

W

ARNING

The use of controls, adjustments and procedures other than those 
specified herein may result in exposure to hazardous situations or 
impair the protection provided by this unit.

Содержание MAX-630G

































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды