EXFO LTB-8, Руководство пользователя

Страница: 50 / 402

Getting Started with Your Unit
42
LTB-8
Understanding Module Statuses
Ejecting The module is being prepared for safe removal from the
unit.
Once the corresponding eject button is pressed (on the
unit or in Toolbox X), the applications that were using the
module start preparing it for safe removal.
When the module is ready for removal, its status switches
to “Safe to remove”.
Safe to remove The module can now be safely removed from the unit.
The applications have finished preparing the module for
removal.
If you wish to continue working with a module having this
status, you can either:

Remove it from the unit, and then reinsert it.
OR

Press the eject button again (on the unit or in Toolbox
X) to reconnect it.
Error The module cannot be used at this time because it had to
protect itself from a critical problem.
Press the eject button (on the unit or in Toolbox X).
The applications will prepare the module for removal and
the module’s status will change to “Safe to remove”. You
will then have the choice to either remove this module
from the unit or reconnect it.
Status Meaning