EXFO LTB-8, Руководство пользователя

Страница: 33 / 402

Getting Started with Your Unit
LTB-8
25
Inserting and Removing Test Modules
Inserting and Removing Test Modules
To insert a module into the LTB-8:
1.
Take the module an place it horizontally so that the connector pins are
at the back, and the protruding edges are facing downwards.
2. Insert the protruding edges of the module into the grooves of the
receptacle’s module slot.
C
AUTION

There is no need to turn off your unit before inserting or
removing test modules.
However, removing modules without following the instructions
provided in this user documentation could have unfortunate
consequences. Doing so could result in unexpected behavior of
the test applications, instability of the system, or even cause
irreparable damage to your modules, depending on the
operation underway when the modules are removed.

To avoid damaging your unit, use it only with modules
approved by EXFO.
Protruding edges
Connector pins at
the back
Identification sticker