EXFO IQS-8120NGE, Руководство пользователя

Страница: 82 / 546

Creating and Starting a Test Case
68
IQS-8500 Series and IQS-8120NGE/8130NGE
Introducing the Test Setup
Introducing the Test Setup
The
Test Setup
window is displayed by default when the SUI is started. In
the case where the SUI is not in the test setup window, press the Test
Setup
tab from the
TEST Tab
on page 38.

Tree
allows seeing the configuration test structure (data path).

Grid is used for test case direction (decoupled test mode).

Data Path Selector
is used to select the datapath structure (for
example: port, signal, Pattern, etc.) of the test case.

Configuration section a
llows parameters configuration for each node
of the test.
Test Name
represents the name of the test connection used to identify
the test. The default setting is TEST .
Note:
The other configuration section parameters are described for each specific
test.
Data Path
Selector
Configuration
section
Test Setup
Controls