manualshive.com logo in svg

EXFO FTV-700 series, Руководство пользователя

Поделиться
Скачать
EXFO FTV-700 series Скачать руководство пользователя страница 273

OTDR

263

16 Maintenance

To help ensure long, trouble-free operation:

³

Always inspect fiber-optic connectors before using them and clean 
them if necessary.

³

Keep the unit free of dust.

³

Clean the unit casing and front panel with a cloth slightly dampened 
with water.

³

Store unit at room temperature in a clean and dry area. Keep the unit 
out of direct sunlight.

³

Avoid high humidity or significant temperature fluctuations.

³

Avoid unnecessary shocks and vibrations.

³

If any liquids are spilled on or into the unit, turn off the power 
immediately, disconnect from any external power source, remove the 
batteries and let the unit dry completely.

W

ARNING

Use of controls, adjustments, and procedures for operation and 
maintenance other than those specified herein may result in 
hazardous radiation exposure.

Содержание FTV-700 series








































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды