EXFO FTB-860, Руководство пользователя, Страница: 94 / 409

RFC 2544 Test Setup and Results
82
FTB-860/880
Subtests Configuration

Nb. of Validations : Select the number of times the result should be
validated. Choices are
1
to
50
times. The default setting is
1
time.

Max. Rate : Select the Maximum Rate so that the throughput test should
begin with, in terms of a percentage of the line rate (
%
),
Mbit/s
, or in
Gbit/s . The accepted values are as follows:
Max.
Rate
Interface Speed
10 Mbit/s 100 Mbit/s 1000 Mbit/s 10G LAN 10G WAN
a
a. The maximum value for 10G WAN may be lower depending on the frame size. The maximum value will be
adjusted for each frame size.
%
Default: 0.001 - 100.000,
100.000
0.001 - 92.857
92.857
Mbit/s
Default: 0.001 - 10.000
10.000
0.001 - 100.000
100.000
0.01 - 1000.00
1000.00
0.001 - 10000.000
10000.000
0.001 - 9285.714
9285.714
Gbit/s
Default: Not Applicable Not Applicable 0.001 - 1.000
1.000
0.001 - 10.000
10.000
0.001 - 9.285
9.285