EXFO FTB-860 Скачать руководство пользователя страница 57

Страница: 57 / 409

EtherSAM Test Setup and Results

NetBlazer

Service Profile Configuration

Copy Service

The

Copy Service

allows to copy the configuration of a service to one or

several services.

To copy the service settings, press the

Copy Service

button.

To copy the service configuration to one or several services:
1.

In the

Copy Service

list, select the service number the configuration

will be copied from.

Select all service check boxes that will inherit the configuration from
the selected service.

Press on

Copy

to confirm the service configuration copy for all selected

services.

Press

Close

to close the window.

Framing



Profile

: The

Profile

button allows you to set the service profile. The

icon of the selected service profile is displayed next to the

Profile

button. The name of the selected service profile is displayed in the text
box available at the right side of the service profile icon. Refer to

Profile

on page 48 for more information.

Содержание FTB-860


























































































































































































































































































































































































































Результаты поиска

Содержание FTB-860

Отзывы:

EXFO FTB-860, Руководство пользователя, Страница: 57 / 409

Результаты поиска

Содержание FTB-860

Отзывы: