manualshive.com logo in svg

EXFO FTB-860, Руководство пользователя, Страница: 306 / 409

Поделиться
Скачать
EXFO FTB-860 Скачать руководство пользователя страница 306

Common Test Setup, Results, and Functions

294

FTB-860/880

Test Configurator - Interface

Test Configurator - Interface 

Note:

Available with 

Packet Sync

 test applications.

From the 

Test

 menu, press 

Setup

, 

Test Configurator

, the interface block, 

and the 

Interface

 tab. 

LINK 

A green/red arrow next to the LINK label is used to indicate the status 
of the link. 

A green arrow indicates that the link is up.

A red arrow indicates alarms, the link is down.

Local Fault Detected

, 

Local Fault Received

, and 

Remote Fault 

alarm 

status are displayed for 10GE LAN interface. Refer to 

Ethernet

 on 

page 341 for more information. 

Содержание FTB-860


























































































































































































































































































































































































































Отзывы:

Нет отзывов