manualshive.com logo in svg

EXFO FTB-860, Руководство пользователя, Страница: 215 / 409

Поделиться
Скачать
EXFO FTB-860 Скачать руководство пользователя страница 215

SyncE Test Setup and Results

NetBlazer

203

SyncE

SyncE 

From the 

Test

 menu, press

 Setup

, 

Test Configurator

, and the 

SyncE

 test 

block. 

ESMC Monitoring 

ESMC

 (Ethernet Synchronization Message Channel) is a live value 

monitored even when the test is not started. 

An arrow next to the ESMC label indicates that ESMC valid information 
frames are received or not.

A green arrow indicates that at least one ESMC valid information 
frame, containing a valid FCS, was received within a second in the 
last 5-second interval.

A red arrow indicates that no ESMC valid information frames were 
received for more than 5 seconds.

A gray arrow indicates a pending state.

Received QL 

indicates the last Quality Level received. The 

Received QL

 is a live value monitored even when the test is not 

started. 

Содержание FTB-860


























































































































































































































































































































































































































Отзывы:

Нет отзывов