manualshive.com logo in svg

EXFO FTB-860, Руководство пользователя, Страница: 202 / 409

Поделиться
Скачать
EXFO FTB-860 Скачать руководство пользователя страница 202

1588 PTP Test Setup and Results

190

FTB-860/880

Summary (1588 PTP)

Summary (1588 PTP) 

From the 

Test

 menu, press

 Results

, and the 

Summary

 tab. 

Test Status 

displays the current status of the 1588 PTP test. The 

pass/fail verdict is also displayed when enabled. 

Test Status

Description

--

Idle state, the test is not running or results are not 

available. 

In Progress

The test is running. 

Completed

The test is completed, stopped at the planned time, or 

manually stopped when there is no set timer. 

Aborted

The test is interrupted; stopped before the set timer. 

[Message type] Request Denied

, 

Session Canceled

, or 

No Reply

 is displayed next to 

Aborted

 when applicable.

Содержание FTB-860


























































































































































































































































































































































































































Отзывы:

Нет отзывов