manualshive.com logo in svg

EXFO FTB-860, Руководство пользователя, Страница: 174 / 409

Поделиться
Скачать
EXFO FTB-860 Скачать руководство пользователя страница 174

Ping Test Setup and Results

162

FTB-860/880

Summary Results

Replied From

: Indicates the IP address of the replier.

Bytes

: Indicates the buffer size of the ICMP echo response.

Time

: Indicates the time of response in milliseconds.

TTL 

for IPv4 and 

Hop Limit (TTL) 

for IPv6: Indicates the TTL of the 

ICMP echo response. 

Statistics

Packets Transmitted

: Indicates the number of sent packets.

Packets Received

: Indicates the number of received packets.

Percentage Lost

: Indicates the percentage of packets lost.

Minimum Round Trip Time (ms)

: Indicates the minimum time 

recorded for a Ping request to be answered.

Maximum Round Trip Time (ms)

: Indicates the maximum time 

recorded for a Ping request to be answered.

Average Round Trip Time (ms)

: Indicates the average time required 

for a Ping request to be answered.

Содержание FTB-860


























































































































































































































































































































































































































Отзывы:

Нет отзывов