manualshive.com logo in svg

EXFO FTB-860, Руководство пользователя, Страница: 13 / 409

Поделиться
Скачать
EXFO FTB-860 Скачать руководство пользователя страница 13

NetBlazer

1

1

Introducing the FTB-860/880 

NetBlazer Series

The FTB-860/880 NetBlazer Series offers field technicians comprehensive, 
yet simple test suites to quickly and easily turn up, validate and 
troubleshoot Ethernet services, with full EtherSAM capabilities, from 
10 Mbit/s to 10 Gbit/s.

Key Features and Benefits

Accelerate Ethernet service activation with bidirectional EtherSAM 
(ITU-T Y.1564) and RFC 2544 test suites, multistream traffic generation, 
Through mode and bit-error-rate (BER) testing.

Efficiently assess Fibre Channel networks with best-in-class coverage 
via 1x, 2x, 4x, 8x and 10x interfaces.

Packet synchronization turn-up and troubleshooting (SyncE/1588 PTP).

FTTA validation (CPRI and OBSAI) at up to 3.1 Gbit/s via BER testing

Experience unprecedented configuration simplicity with hybrid 
touchscreen/keypad navigation and data entry.

Increase technician autonomy and productivity with intelligent 
discovery of remote EXFO Ethernet testers, as well as in-service testing 
via dual-port Through mode.

Eliminate errors in data interpretation with revolutionary new GUI on 
7-inch TFT screen, historical event logger, visual gauges and 3D-icon 
depictions of pass/fail outcomes. 

Simplify reporting with integrated Wi-Fi and Bluetooth connectivity 
capabilities. 

Integrated applications to test VoIP services, and additional IP test 
utilities including VLAN scan and LAN discovery via EXpert VoIP and 
EXpert IP test tools. 

Содержание FTB-860


























































































































































































































































































































































































































Отзывы:

Нет отзывов